Technical parameters

Casting weight ranges from about 15 g to 10 kg.
Dimensions casts usually do (WxLxH) mm 200x420x150 Weight and dimensions outside the boundaries can be agreed at negotiations.
Precision casting – according to EN ISO 8062-3 DCTG 6 Tolerated dimensions.
A tight tolerance is necessary to agree.
Range of cast alloys (ISO, DIN, AISI, AFNOR, UNI, GOST) – at a hearing can be completed. Finish – usually achieved is Ra 6,3 um.

Dimensional Tolerance (mm) – a selection of standards (the most common size) :
Nominal size (mm)		tolerancies	range	Nominal size (mm)		tolerancies	range
od	do			od	do
	6	0.15	0.3	100	120	0.76	1.52
6	10	0.18	0.36	120	140	0.84	1.68
10	18	0.22	0.44	140	160	0.92	1.84
18	30	0.26	0.52	160	180	1.02	2.04
30	50	0.4	0.8	180	200	1.12	2.24
50	65	0.52	1.04	200	225	1.28	2.56
65	80	0.6	1.2	225	250	1.44	2.88
80	100	0.68	1.36
Carbon steel
	Marking	C	Mn	Si	Cr	Ni	Mo	Cu		WNr.	short
	12,010	0.07	0.35	0.15	max.	max.
		0.14	0.65	0.4	0.15	0.3
X	422,603	0.17	0.5	0.2	max.	max.	Cu max.	Cr+Ni+Cu		1.1150	Ck 22.8
		0.25	0.9	0.5	0.3	0.4	0.3	max. 0,90
	C 22	0.17	0.4	max.	max.	max.		max.			C 22
		0.24	0.7	0.4	0.3	0.4		0.3
X	422,842	0.1	0.6	max.	0.8		0.2			Jan-42	16 CrMo 4
		0.2	0.9	0.6	1.1		0.35
X	1.7242 DIN	0.13	0.5	0.15	0.9	max.	0.2
		0.2	0.8	0.35	1.2	4	0.35
	14,220	0.14	1.1	0.17	0.8	max.	0.2				16 MnCr5
		0.19	1.4	0.37	1.1	0.4	0.35
	16,220	0.14	0.7	0.17	0.8	1.3				Jan-19	GS-15CrNi 6
		0.19	1	0.37	1.1	1.6
X	422,853	max	0.5	max	0.5	0.5	0.2				GS-15 CrV4
		0.18	0.9	0.6	0.8	0.7	0.35
Steels for general use
	Marking	C	Mn	Si	Cr	Ni	Cu	WNr.	Short
	422,640	0.2	0.4	0.2
		0.28	0.8	0.5
X	422,650	0.28	0.4	0.2				1.0528	C 30
		0.38	0.8	0.5
x	422,660	0.4	0.4	0.2				1.1191	GS-Ck 45
		0.5	0.8	0.5
x	422,670	0.52	0.5	0.17	max.	max.	Cu max.	1.0535	C 55
		0.6	0.8	0.37	0.25	0.6	0.3
X	422,709	0.2	1.2	0.2				1.1160	zvariteľná
		0.28	1.6	0.5
x	422,712	0.17	0.9	0.2				11,523	zvariteľná
		0.25	1.4	0.5
X	422,819	0.45	0,60 0,90	0.6				1.1206	Ck 50
		0.55		0.9
Steels for refining
	Marking	C	Mn	Si	Cr	Ni	Mo	V		WNr.	Short
X	422,830	0.45	0.6	0.3	0.8			0.15			GS-50 CrV 4
		0.55	1	0.8	1.1			0.25
	422,843	0.35	0.7	0.3	0.8		0.2				42 CrMo4
		0.45	1	0.8	1.1		0.35
X	422,848	0.28	0.4	0.3	2.8		0.4	0.12			33CrMoV9
		0.38	0.7	0.6	3.5		0.7	0.25
	422855	0.38	0.6	0.5	0.7	1.7	0.3				GS-36CrNiMo4
		0.48	1	0.8	1	2	0.45
X	42CrMo4	0.38	0.6	max.	0.9		0.15				GS-42 CrMo4
		0.45	0.9	0.4	1.2		0.3
	15,230	0.24	0.4	0.17	2.2			v			30CrV8
		0.34	0.8	0.37	2.5			0.2
	15,241	0.35	0.6	0.17	1.7			0.1			58 CrV 4
		0.43	0.8	0.37	2.09			0.2
	25CD4	0.23	0.1	0.6	0.9		0.15				25CrMo4
		0.29	0.4	0.9	1.2		0.3
	35CD4	0.3	0.6	0.1	0.85		0.15				35CrMo4
		0.37	0.9	0.4	1.15		0.3
Abrasion resistant steels
	Marking	C	Mn	Si	Cr	Ni	Mo	V		WNr.	Short
X	422,767	0.25	1.4	0.4	0.5	max.	0.4	0.2	Bor		VP-7
		0.38	1.8	0.6	1	0.3	0.6	0.4	0.01
	422,921	0.35	0.7	0.3	0.8						HEDFIELD
		1.1	12	max	0.7
	422491	1.6	0.5	1.5	15				liatina	Jan-43	G-X160 CrSi 18
		2.4	1	2.4	18
x	422497	3	0.5	max.	14	max.	2		liatina	0.9635	G-X300 CrMo 15.3
		3.4	0.8	1	16	0.7	2.5
Anti-corrosive martensitic stainless steel
	Marking	C	Mn	Si	Cr	Ni	Mo	V	W	WNr.	Short
	422,905	max.	max.	max.	12	max					G-X10Cr14
		0.15	0.7	0.7	14	1
X	422,906	0.15	max.	max.	12	max					G-X30Cr14
		0.3	0.7	0.7	14	1
x	422916	0.16	0.4	0.1	10.2	0.2	0.9	0.2
		0.22	0.7	0.4	11.8	0.6	1.2	0.35
	422917	0.1	0.6	0.2	11.5	0.7		0.1	0.5
		0.18	1	0.6	13.2	1.1		0.2	0.8
	422960	max.	max.	max.	12	3.5	0.4
		0.06	1	0.8	13.5	4.5	0.7
x	Jan-08	0.06	max.	max.	12	1	max
		0.12	1	1	14	2	0.5
x	Jan-57	0.14	max.	0.25	15.5	1.5					X17CrNi16-2
		0.23	1	1	17.5	2.5
Anti-corrosive ferritic-austenitic stainless steel (DUPLEX)
	Marking	C	Mn	Si	Cr	Ni	Mo	Cu	N	WNr.	Short
X	Jan-17	max.	max.	max.	24.5	5	2.5	2.75	0.12	Jan-17	X2CrNiMoCuN25-6-3-3
		0.03	1.5	1	26.5	7	3.5	3.5	0.22
Liatiny
	Marking	C	Mn	Si	Cr	Ni	Mo			WNr.	Short
	422420	Chemické zloženie nie je uvedené									GG-20
	422425	Chemické zloženie nie je uvedené									GG-25
	422465	2.5	max.	4.5	max.	max.					G-X300 Si 5
		3.25	0.8	6	1	1
	422491	1.6	0.5	1.5	15					Jan-43	G-X160 CrSi 18
		2.4	1	2.4	18
	422497	3	0.5	max.	14	max.	2			0.9635	G-X300 CrMo 15.3
		3.4	0.8	1	16	0.7	2.5
Anti-corrosive austenitic stainless steel
	Marking	C	Mn	Si	Cr	Ni	Mo			WNr.	Short
X	17,240	max.	max.	max.	17	9			AISI 304	Jan-01	X5CrNI18-9
		0.07	2	1	20	11.5
X	X5CrNi	max.	max.	max.	18	8				Jan-08	G-X5CrNi19-10
		0.07	1.5	1.5	20	11
	Jan-08	max.	max.	max.	18	9	2			Jan-08	G-X5CrNiMo19-11-2
		0.07	1.5	1.5	20	12	2.5
X	422,931	max.	0.5	0.5	18	8				Jan-12	G-X10CrNi18-8
		0.15	1.2	1.2	21	11
X	422,942	max.	0.5	0.75	18	9	2			Jan-10	G-X10CrNiMo18-9
		0.2	1.2	1.5	20	11	2.5
Tool steel
	marking	C	Mn	Si	Cr	Ni	Mo	V	W	WNr.	Short
	19,552	0.32	0.2	0.8	4.5		1.1	0.35			CrMoSiV
		0.42	0.5	1.2	5.5		1.6	0.6
	19,663	0.5	0.5	0.3	0.9	1.5	0.3	0.1			NiCrMoV
		0.6	0.9	0.6	1.3	1.9	0.5	0.25
	19,733	0.52	0.15	0.8	0.9	max			1.7
		0.62	0.4	1.2	1.2	0.35			2.2
Heat resistant steel
	Marking	C	Mn	Si	Cr	Ni	Mo	V		WNr.	Short
	422916	0.16	0.4	0.1	10.2	0.2	0.9	0.2
		0.22	0.7	0.4	11.8	0.6	1.2	0.35
	17,255	max.	max.	0.45	24	20	max.			Jan-40	G-X15CrNi 25.20
		0.2	1.5	1.75	27	22	0.5
	42 2936M	0.3	0.5	0.75	23	14	max.			Jan-37	G-X40CrNiSi 25.12
		0.45	1.5	1.75	26	16	0.3
	422,952	0.3	0.5	0.75	24	20	max.			Jan-48	G-X40CrNiSi 25.20
		0.45	1.2	1.5	27	22	0.5